Search

Search

Shop by Category

Shopping Information

We Accept: Visa, MasterCard, American Express (no surchage)

SSL Certificate

Tramex Concrete Moisture Encounter CMEX5

  • Tramex Concrete Moisture Encounter CMEX5

    Tramex Concrete Moisture Encounter CMEX5 TRCMEX5

    The Tramex Concrete Moisture Encounter CMEX5 has 4 measurement modes:
    Non-destructive test (NDT) mode:
    The Tramex Concrete Moisture Encounter X5 is a non-destructive digital multi moisture meter for concrete floors and slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline. The CMEX5 also provides Carbide Method equivalent readings for concrete and other cementitious substrates as well as comparative readings as per ASTM F2659.
    Hygrometer mode:
    The built-in Ambient Relative Humidity Sensor measures Ambient Relative Humidity, Temperature, Dew Point, and Humidity Ratio (or Mixing Ratio) of the environment.
    Equilibrium Relative Humidity mode
    (optional plug-in probe):
    Using the optional plug-in Hygro-i2 RH probes, the Concrete Moisture Encounter X5 will measure Equilibrium Relative Humidity, Temperature, Dew Point and Humidity Ratio in structural materials. A structural material such as a concrete slab can be tested using the in-situ method or RH Hood methods (International Standards: ASTM F2170 & BS 8201, 8203, 5325). Relative Humidity Probes can also be used for ambient RH measurements within air spaces.
    PIN Meter mode (optional plug-in probe):
    The Concrete Moisture Encounter X5 becomes a resistance type meter and measures the percentage moisture content (%MC) of wood when used with the optional plug-in PIN meter. International wood standards or pre-programmed wood species can be selected. PIN meter mode can also be used for Drywall and WME (Wood Moisture Equivalent) readings for other materials.
    The Concrete Moisture Encounter X5 detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture present in the material. The Concrete Moisture Encounter X5 determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds, displayed on a large clear digital dial.
    Specifications:
    Size:
    Weight:
    Construction:
    Power:
    Display:
    Depth of penetration in concrete:
     
    180mm x 85mm x 40mm
    357g
    ABS Body
    2 x AA ALKALINE (included)
    Digital (front lit)
    approx. 20mm
    Measuring range:
    Moisture content for Concrete: 
    Comparative for Gypsum floor screed:
    CM Equiv Anhydrite/Concrete:
    Reference scale:
    Relative Humidity:
    - with optional Hygro-i2® probe - Humidity accuracy:
    Moisture content for wood (with optional wood pin probes):
    Moisture content for drywall (with optional wood pin probes):
     
    0 to 6.9 %
    0 to 12
    0 to 2.7 / 0 to 4.3
    Reference scale: 0 to 100
    0 to 99%
    0% to 99%RH +/- 2% @ 25°C 
    5 to 30 %
    0.0 to 8.5%
    $1,540.00 (AUD inc GST)